Passive air conditioning.
Keeps the heat out in summer.
Keeps it in during winter.
R'BULL Pro 13
High-performance thin reflective insulation
Thermal performance and durability of R'BULL Pro 13 insulation
R'BULL Pro 13: mastering thermal radiation
R'BULL Pro 13 has been designed to make the most of thermal radiation. Unlike some thin reflective insulation materials that use aluminised polymer films, it incorporates genuine pure aluminium reflective sheets, combined with a technical structure designed to reduce heat transfer, maintain the efficiency of the system and ensure long-lasting performance.
6.5 microns of thermal precision
Reduced to 6.5 microns, our aluminium foil limits its own heating and optimises the reflection of thermal radiation. The result: less heat absorbed, more energy reflected
A high-performance infrared mirror
Thanks to pure aluminium with very high reflectivity, R'BULL Pro 13 has an emissivity of 0.05 and a solar factor of less than 0.03. It acts as a thermal mirror capable of reflecting infrared radiation outwards or inwards, depending on the installation configuration.
A structure designed to limit heat transfer
Our air bubbles keep the reflective sheets at a distance from the core of blue polyethylene foam. This design reduces direct contact, enhances the reflective properties of the aluminium and helps limit heat transfer, ensuring better-preserved efficiency over time.
How to enhance your roof insulation with reflective insulation
Don’t replace your insulation. Enhance it.
R'BULL Pro 13 is designed to complement your traditional insulation (glass wool, rock wool, wood) and effortlessly meet the RE 2020 standards and requirements for major renovations (BAR-TH-175).
- Unused loft space: Add 5.40 m².K/W to meet the 7 m².K/W requirement.
- Roof slopes: Add 4.40 m².K/W to aim for 6 m².K/W.
- Interior walls: Only 2.10 m².K/W to add to reach 3.7 m².K/W.
- Ground floors: Add 1.40 m².K/W to meet the required 3 m².K/W.
Technical installation and fitting of thin under-roof insulation
The perfect balance between slimness and extreme insulation. At just 13 mm thick, our best-seller acts as a genuine climate shield. See how absolute performance is integrated into the design.
- Reinforced insulating core (13 mm effective thickness)
- Radical treatment of thermal bridges
- Summer/winter climate shield (95% of infrared rays blocked)
Installation diagram for R'BULL Pro 13 thin insulation under the roof
Just 13 millimetres to better control the heat under your roof. Discover, layer by layer, how R'BULL Pro 13 helps to reflect solar radiation, limit overheating and sustainably improve the comfort of your loft.
The Roof
Roof tiles and battens provide the first line of defence against solar heat gain. Thanks to the roof’s natural ventilation, some of the heat is dissipated before it even reaches the living space.
The R'BULL Pro 13 Shield
13 mm of technology designed for performance. Its two sides made of pure aluminium reflect 95% of solar radiation before it is converted into heat. Airtight and moisture-proof, R'BULL Pro 13 helps to provide long-lasting protection for your loft.
The Active Air Gap
Created through the use of R'BULL Pro 13, this airtight air gap complements the system’s efficiency. It reduces residual heat transfer and helps maintain a better thermal balance, in both summer and winter.
The Finish
The plasterboard on hangers ensures a clean and neat finish. To further enhance the overall performance, it is recommended to add fibrous insulation to improve overall thermal comfort.
Areas of application
Hover over the structures to view the insulation areas. Tap the structures to view the insulation areas.
| Technical Specifications | |
|---|---|
| Trade name | R'BULL Pro 13 |
| Technical reference | BOLTHERM 235 IGN V |
| Thickness | 13mm |
| Dimensions | Width: 1.20 m | Length: 20.83 m Area per roll: 25 m² |
| Thermal resistance according to EN ISO 22097 |
1.60 m².K/W with two 20 mm air gaps 0.29 m².K/W for the insulation alone |
| Thermal conductivity | λ = 0.04905 W/(m·K) |
| Weight | Weight per unit area | 14.5 kg | 580 g/m² |
| Composition | 6.5 µm aluminium + 5 mm PE/PET bubbles + 3 mm PE foam + 5 mm PE/PET bubbles + 6.5 µm aluminium |
| Water vapour resistance according to EN 12086 |
µ > 20,000 Sd > 260 m |
| Corrosion resistance according to EN ISO 9227 |
Salt spray: no deterioration |
| Tensile strength according to EN 1607 |
0.3 kPa (before/after ageing) |
| Packaging | |
|---|---|
| Roll per package | 1 |
| Packages per pallet | 6 |
| m² per pallet | 150 |
| m² per container | 4000 |
| Delivery |
France: 48 hours Europe: 1 week |
| Origin |
|
| EAN code | 3760372520274 |
Downloadable certifications
Fire performance, DoP, tests (emissivity and solar factor), thermal resistance report, product data sheet.
R'BULL Tape. The seal of waterproofing.
A heat shield is only effective if its seams are airtight. Discover the high-performance adhesive designed to bond seamlessly with the R'BULL range.
Zero thermal bridges.
Made from pure aluminium and an extreme acrylic adhesive, it guarantees a 100% airtight and water-vapour barrier for the entire lifespan of your insulation.
- Immediate and permanent adhesion
- Resistant to extreme temperatures
- Durability equivalent to the insulation
Ceilingo’s expertise in a few questions
Everything you need to know about R'BULL Pro 13 technology.